After completion of simulation

You can view the final status of the performers (individual and system) and resources (consumable and non-consumable) used during this process simulation, from the respective views. You can view any violations and recommendations by clicking the respective view, as described in this section.

Violations view: lists violations (if any) in the objectives defined (see Defining objectives) in the current scenario.

Table 81. Violation information
Heading	Description
Source	Indicates the source whose objective has been violated. Possible sources are the simulation project, process, workstep, performer, resource, and path.
Name	Displays the objective that was violated.
Condition	Displays the condition defined in the violated objective.
Path	Displays the path to the source whose objective has been violated. This is applicable only for defined paths and worksteps (including worksteps of an inline subprocess). The format used is: <processname>-><source>.

Recommendations view: lists bottlenecks and other problems encountered during the simulation run. An example of a bottleneck can be that a particular workstep had a high waiting time, before using a particular resource or performer.

Table 82. Recommendations view
Heading	Description
Source	Indicates the source where the problem has arisen.
Problem	Displays the description of the problem.
Recommendation	Displays the statement of a possible solution to the problem. For example, “Increase resources used by workstep.”