FOR statement

Starts an iterating block that reads a record from each of one or more tables at the start of each block iteration. Use an END statement to end a FOR block.

Data movement



Block properties

Iteration, record reading, record scoping, frame scoping, transactions by default.

Syntax

[ label: ] 
FOR [ EACH | FIRST | LAST ]record-phrase 
  [ , [ EACH | FIRST | LAST ]record-phrase ]... 
  [query-tuning-phrase ] 
  [ BREAK ] 
  [ BY expression[ DESCENDING ] 
  | COLLATE ( string , strength[ , collation] ) [ DESCENDING ] 
  ]... 
  [variable = expression1 TO expression2[ BY k ]] 
  [ WHILE expression ] 
  [ TRANSACTION ] 
  [ STOP-AFTER expression ] 
  [on-error-phrase ] 
  [on-endkey-phrase ] 
  [on-quit-phrase ] 
  [on-stop-phrase ] 
  [frame-phrase ] :

  for-body
EACH
Starts an iterating block, finding a single record on each iteration. If you do not use the EACH keyword, the Record phrase you use must identify exactly one record in the table.
FIRST

Uses the criteria in the record-phrase to find the first record in the table that meets that criteria. The AVM finds the first record before any sorting.

The following statement displays Customer 1 (CustNum is the primary index of the Customer table), not the Customer with the lowest CreditLimit:

FOR FIRST Customer NO-LOCK BY Customer.CreditLimit:
  DISPLAY Customer.
END.

The following statement displays the Customer with the lowest CreditLimit:

FOR EACH Customer NO-LOCK BY Customer.CreditLimit:
  DISPLAY Customer.
  LEAVE.
END.

See the Notes section for more information on using this option.

LAST

Uses the criteria in the record-phrase to find the last record in the table that meets that criteria. The AVM finds the last record before sorting.

FOR LAST Customer BY Customer.CreditLimit:
  DISPLAY Customer.
END.

The procedure above displays the Customer with the highest Customer number (CustNum is the primary index of the Customer table), not the Customer with the highest CreditLimit.

A procedure that displays the Customer with the highest CreditLimit looks like the following:

FOR EACH Customer NO-LOCK BY Customer.CreditLimit DESCENDING:
  DISPLAY Customer.
  LEAVE.
END.

See the Notes section for more information on using this option.

record-phrase

Identifies the set of records you want to retrieve. This can also be the built-in buffer name, proc-text-buffer, that you can use to return table rows from a stored procedure.

To use FOR EACH/FIRST/LAST to access a record in a table defined for multiple databases, you must qualify the record's table name with the database name.

This is the syntax for record-phrase:

record
  [ constant ] [ OF table]
  [ USE-INDEX index | TABLE-SCAN ]
  [ USING [ FRAME frame ] field
       [ AND [ FRAME frame ] field ] ...
  ]
  [ WHERE expression ]
  [ SHARE-LOCK | EXCLUSIVE-LOCK | NO-LOCK ]
  [ NO-PREFETCH ]

Specifying multiple occurrences of record-phrase selects the tables using an inner join.

For more information on record-phrase and inner joins, see the Record phrase reference entry.

query-tuning-phrase

Allows programmatic control over the execution of a DataServer query. Following is the syntax for the query-tuning-phrase:

QUERY-TUNING
  (
    {[    LOOKAHEAD [ CACHE-SIZE integer ]
          | NO-LOOKAHEAD
      ]
      [ DEBUG { SQL | EXTENDED }| NO-DEBUG ]
      [ SEPARATE-CONNECTION | NO-SEPARATE-CONNECTION ]
      [ JOIN-BY-SQLDB | NO-JOIN-BY-SQLDB ]
      [ BIND-WHERE | NO-BIND-WHERE ]
      [ INDEX-HINT | NO-INDEX-HINT ]
    }
  )

For more information on the query-tuning-phrase, refer to the appropriate DataServer Guide (OpenEdge Data Management: DataServer for Oracle or OpenEdge Data Management: DataServer for Microsoft SQL Server).

BREAK

Over a series of block iterations, you might want to do some work based on whether the value of a certain field changes. This field defines a break group. For example, you might be accumulating some value, such as a total. You use the BREAK option to define State as the break group. For example:

FOR EACH Customer BREAK BY Customer.State:
  DISPLAY Customer.State Customer.Name 
    Customer.CreditLimit (TOTAL BY state).
END.

Here, the AVM accumulates the total CreditLimit for all the customers in the Customer table. Each time the value of the State field changes, the AVM displays a subtotal of the CreditLimit values for customers in that state.

You can use the BREAK option anywhere in the block header, but you must also use the BY option to name a sort field.

You can use the BREAK option in conjunction with the ACCUMULATE statement and ACCUM function. For more information, see the reference entries for those language elements.

BY expression[ DESCENDING ]

Sorts the selected records by the value of expression. If you do not use the BY option, the AVM retrieves records in the order of the index used to satisfy the record-phrase criteria, or the primary index if no criteria is given. The DESCENDING option sorts the records in descending order (not in the default ascending order).

Note: You cannot reference a BLOB or CLOB field in the BY option.

You can use multiple BY options to do multi-level sorting. For example:

FOR EACH Customer BY Customer.CreditLimit BY Customer.Name

Here, the Customers are sorted in order by CreditLimit. Within each CreditLimit value, Customers are sorted alphabetically by Name.

There is a performance benefit if an index on expression exists: BREAK BY does not have to perform the sort that is otherwise required to evaluate FIRST, LAST, FIRST-OF, and LAST-OF expressions.

COLLATE ( string , strength[ , collation] ) [ DESCENDING ]

Generates the collation value of a string after applying a particular strength, and optionally, a particular collation. The DESCENDING option sorts the records in descending order (not in default ascending order).

string
A CHARACTER expression that evaluates to the string whose collation value you want to generate.
strength

A CHARACTER expression that evaluates to an ABL comparison strength or an International Components for Unicode (ICU) comparison strength.

The ABL comparison strengths include:

  • RAW — Generates a collation value for the string based on its binary value.
  • CASE-SENSITIVE — Generates a case-sensitive collation value for the string based on a particular collation. If you specify this strength with an ICU collation, the AVM applies the ICU TERTIARY strength.
  • CASE-INSENSITIVE — Generates a case-insensitive collation value for the string based on a particular collation. If you specify this strength with an ICU collation, the AVM applies the ICU SECONDARY strength.
  • CAPS — Generates a collation value for the string based on its binary value after converting any lowercase letters in the string to uppercase letters, based on the settings of the Internal Code Page (-cpinternal) and Case Table (-cpcase) startup parameters.

The ICU comparison strengths include:

  • PRIMARY — Generates a collation value for the base characters in the string.
  • SECONDARY — Generates a collation value for the base characters and any diacritical marks in the string.
  • TERTIARY — Generates a case-sensitive collation value for the base characters and any diacritical marks in the string.
  • QUATERNARY — Generates a case-sensitive collation value for the base characters and any diacritical marks in the string, and distinguishes words with and without punctuation. ICU uses this strength to distinguish between Hiragana and Katakana when applied with the ICU-JA (Japanese) collation. Otherwise, it is the same as TERTIARY.
Note: Use ICU comparison strengths only with ICU collations.
collation

A CHARACTER expression that evaluates to the name of an ABL collation table or ICU collation. If collation does not appear, COLLATE uses the collation table of the client.

The AVM reports an error and stops execution if one of the following occurs:

  • strength does not evaluate to a valid value.
  • collation does not evaluate to a collation table residing in the convmap.cp file.
  • collation evaluates to a collation table that is not defined for the code page corresponding to the -cpinternal startup parameter.
variable = expression1 TO expression2[ BY k]

Identifies the name of a field or variable whose value you are incrementing in a loop. The expression1 is the starting value for variable on the first iteration of the loop. The k is the amount to add to variable after each iteration and must be a constant. It (k) defaults to 1. The variable, expression1, and expression2 parameters must be integers.

When variable exceeds expression2 (or is less than expression2 if k is negative) the loop ends. Since expression1 is compared to expression2 at the start of the first iteration of the block, the block can be executed 0 times. The AVM re-evaluates expression2 on each iteration of the block.

WHILE expression
Indicates the condition in which you want the FOR EACH block to continue processing the statements within it. Using the WHILE expression option causes the block to iterate as long as the condition specified by the expression is TRUE or the AVM reaches the end of the index it is scanning, whichever comes first. The expression is any combination of constants, operators, field names, and variable names that yield a logical value.
TRANSACTION
Identifies the FOR EACH block as a system transaction block. The AVM starts a system transaction for each iteration of a transaction block if there is not already an active system transaction. See OpenEdge Getting Started: ABL Essentials for more information on transactions.
STOP-AFTER expression

The STOP-AFTER phrase specifies a time-out value for a DO, FOR, or REPEAT block. The integer expression specifies the number of seconds each iteration of a block has until a time-out occurs. If a time-out occurs, the AVM raises the STOP condition, throws a Progress.Lang.StopAfter object, and default STOP condition handling occurs. Use an ON STOP phrase on the block (or an enclosing block) to alter the default STOP condition handling. If enabled, you can also catch a Progress.Lang.StopAfter object using a CATCH block to provide alternate STOP condition handling. For more information, see the Progress.Lang.StopAfter class description.

If the block iteration completes before the specified time expires, the timer resets to expression for the next iteration. In other words, the timer is limited to the scope of a single block iteration. If a block with a STOP-AFTER phrase encloses another block or calls another block, the timer continues while the inner blocks execute.

If a block with a STOP-AFTER phrase contains a nested block with a STOP-AFTER phrase, then each has a timer in effect. If the outer block timer expires while the inner block is executing, the STOP condition is raised even if the timer for the inner block has not expired.

If the STOP condition is handled and execution resumes within the scope of a block with a STOP-AFTER phrase, no timer is in effect until the next iteration of a block with a STOP-AFTER phrase. In other words, all old timers are dismissed but new timers can now be established.

When the timer expires, the STOP condition is raised on the current statement.

Two important use cases for the STOP-AFTER phrase are to time-limit dynamic queries and to time-limit a procedure call. The following example time-limits a procedure call using a RUN statement:

DEFINE VARIABLE cnt as INTEGER INITIAL 0.
PROCEDURE bumpCnt:
    cnt = cnt + 1.
END.

DO STOP-AFTER 5:
    RUN bumpCnt.
END.

Use this technique to also make timed calls to class methods and user-defined functions.

The following example is simplified code that lets you try different STOP-AFTER cases.

DEFINE VARIABLE EndlessCount AS INTEGER INITIAL 0.

DO STOP-AFTER 5 ON STOP UNDO, LEAVE:
    
  FOR EACH Customer STOP-AFTER 1:
       ASSIGN EndlessCount = EndlessCount + 1. 
       /* Try a complex operation on a Customer record to use up 
          the timer in a single iteration and raise the 
          STOP condition in the inner block */
  END.  

  MESSAGE 
    "Procedure half complete. Endlesscount = " EndlessCount ".".
    
  REPEAT STOP-AFTER 1:
      ASSIGN EndlessCount = EndlessCount + 1.
      /*IF EndlessCount > 2000 THEN LEAVE. */
  END.
     
  MESSAGE 
    "Procedure nearly complete. Endlesscount = " EndlessCount "." .
  
END. 
MESSAGE "Procedure complete. Endlesscount = " EndlessCount "." .

If you run this code as is, the outer DO block establishes a 5 second time limit for the work of the DO block and all inner blocks. When the inner FOR EACH block starts, another timer is established for the first iteration of this block. When the first FOR EACH iteration completes, its timer is reset to 1 second for the next iteration. Meanwhile, the outer timer on the DO block continues without interruption.

The FOR EACH block completes and execution continues forward to the REPEAT block, which is an endless loop. The REPEAT block also has a 1 second timer for each iteration of the block. At some point, the outer 5 second timer elapses and the AVM raises the STOP condition. The STOP condition is raised on the statement the AVM was executing when the timer elapsed. Normal STOP handling proceeds from that point.

As the stack unwinds during STOP processing, the AVM encounters the ON STOP phrase on the DO block. The ON STOP phrase dismisses the STOP condition and resumes normal execution with the next statement following the DO block, as directed by the LEAVE option.

If you remove the comments from the IF statement in the REPEAT block, the block will complete within the outer time limit and the STOP condition is not raised.

If you want to experiment with elapsed timers on an inner block, insert a complex operation inside the FOR EACH block.

In the following example, the STOP-AFTER expression is modified during program execution:

DEFINE VARIABLE ix       AS INTEGER NO-UNDO.
DEFINE VARIABLE stopTime AS INTEGER NO-UNDO INITIAL 30.

DO WHILE TRUE STOP-AFTER stopTime ON STOP UNDO, LEAVE:
  RUN spinHere (10000).
  stopTime = stopTime / 2.
END.
MESSAGE "program finished".

PROCEDURE spinHere:
  DEFINE INPUT PARAMETER spinLimit AS INT64 NO-UNDO.

  DEFINE VARIABLE endTime  AS INT64   NO-UNDO.
  DEFINE VARIABLE loopFlag AS LOGICAL NO-UNDO.

  ASSIGN
    loopFlag = TRUE
    endTime  = ETIME(FALSE) + spinLimit.

  DO WHILE loopFlag:
    IF (ETIME(FALSE) > endTime) THEN
      loopFlag = FALSE.
  END.
END PROCEDURE.

Because the STOP-AFTER expression is re-evaluated for each iteration of a looping block, any changes made to the expression during the iteration effect the timer for the block. In the example, the STOP-AFTER time limit is specified by the variable stopTime, which is initially set to 30 seconds. The procedure contains an iterating block which runs a procedure that executes for 10 seconds.

On the first iteration of the DO WHILE TRUE loop, stopTime is 30 seconds. The loop executes for 10 seconds, and then divides stopTime by 2. On the second iteration, the stopTime is 15 seconds; again the loop executes for 10 seconds, and then divides stopTime by 2. On the third iteration, the stopTime is 8 seconds. This time, the procedure spinHere runs for 8 seconds and then raises STOP. The STOP condition is handled by the DO block, and then the program displays the message program finished.

If a code block is called with a time limit of zero, the block is executed as if the STOP-AFTER phrase was omitted from the block declaration.

Consider the following example:

DEFINE VARIABLE barLimit AS INTEGER NO-UNDO.
DEFINE VARIABLE ix       AS INTEGER NO-UNDO INITIAL 1.

DO STOP-AFTER 10 ON STOP UNDO, LEAVE:
  RUN foo.
END.

PROCEDURE foo:
  RUN bar.
END PROCEDURE.

PROCEDURE bar:
  DO WHILE ix > 0 STOP-AFTER barLimit:
    ix = ix + 1.
  END.
END PROCEDURE.

In this example, procedure foo is run from within a timed block with a 10 second time limit; procedure bar is called from within the timed block, and contains an iterating block that specifies the STOP-AFTER phrase. Because the value of the STOP-AFTER expression evaluates to zero (that is, the current value of the barLimit variable), the block within bar is executed as an untimed block. However, the rules for execution of an untimed block within a timed block apply, so the untimed block in bar is executed with an implicit iteration time limit of 10 seconds.

Other points to consider are:

  • If the expression evaluates to zero or less, then this is the equivalent of not specifying a STOP-AFTER phrase.
  • STOP-AFTER phrases are not intended to interact with user interfaces.
  • Blocking calls to third party software components, where the AVM has transferred execution control, cannot be timed out. This category includes operating system calls, MS Windows system calls, and calls to any third party DLLs and Unix shared objects.
on-error-phrase

Describes the processing that takes place when there is an error during a block. This is the syntax for the ON ERROR phrase:

ON ERROR UNDO
  [label1 ]
  [     , LEAVE [ label2 ]
     |  , NEXT [ label2 ]
     |  , RETRY [ label1 ]
     |  , RETURN [ return-value |
               ERROR [ return-value | error-object-expression]|
               NO-APPLY ] 
     |  , THROW 
  ]

For more information, see the ON ERROR phrase reference entry.

on-endkey-phrase

Describes the processing that takes place when the ENDKEY condition occurs during a block. This is the syntax for the ON ENDKEY phrase:

ON ENDKEY UNDO
  [ label1 ]
  [     , LEAVE [ label2 ]
     |  , NEXT [ label2 ]
     |  , RETRY [ label1 ]
     |  , RETURN [ return-value |
               ERROR [ return-value | error-object-expression ]|
               NO-APPLY ]

For more information, see the ON ENDKEY phrase reference entry.

on-quit-phrase

Describes the processing that takes place when a QUIT statement is executed during a block. This is the syntax for the ON QUIT phrase:

ON QUIT
  [ UNDO [ label1 ]]
  [     , LEAVE [ label2 ]
     |  , NEXT [ label2 ]
     |  , RETRY [ label1 ]
     |  , RETURN [ return-value |
               ERROR [ return-value | error-object-expression ]|
               NO-APPLY ]
]

For more information, see the ON QUIT phrase reference entry.

on-stop-phrase

Describes the processing that takes place when the STOP condition occurs during a block. This is the syntax for the ON STOP phrase:

ON STOP UNDO
  [ label1 ]
  [     , LEAVE [ label2 ]
     |  , NEXT [ label2 ]
     |  , RETRY [ label1 ]
     |  , RETURN [ return-value |
               ERROR [ return-value |error-object-expression]|
               NO-APPLY ] 
  ]

For more information, see the ON STOP phrase reference entry.

frame-phrase
Specifies the overall layout and processing properties of a frame. For more information on frame-phrase, see the Frame phrase reference entry.
for-body

The body of the FOR block. Define for-body using the following syntax:

for-logic 
       .
       .
       .
    [ catch-block [ catch-block ... ]]
    [ finally-block ]
END .
for-logic

The logic of the FOR block. This logic can contain the ABL statements allowed within the routine-level block (e.g., procedure, user-defined, or method) where the FOR statement is defined.

Each logic statement must end with a period.

catch-block
Specifies a CATCH statement that defines error handling code for one or more error types. For more information on catch-block, see the CATCH statement reference entry.
finally-block
Specifies a FINALLY statement that defines the processing that must occur after all other processing in the block occurs. For more information on finally-block, see the FINALLY statement reference entry.
END
Specifies the end of the FOR block definition. You must end the FOR block definition with the END statement.

Examples

This procedure reads Customer records that have a CustNum less than 12, sorting the records in order by State before displaying them:

r-fore.p

FOR EACH Customer NO-LOCK WHERE Customer.CustNum < 12 BY Customer.State:
  DISPLAY Customer.CustNum Customer.Name Customer.City Customer.State.
END.

The next procedure gets information from four related tables (Customer, Order, OrderLine, and Item) and displays some information from each. Before displaying the information, the FOR EACH statement sorts it in order by the PromiseDate field, then, within that field, in order by CustNum. Within the CustNum field, the data is sorted by the LineNum field.

r-fore2.p

FOR EACH Customer NO-LOCK, EACH Order OF Customer NO-LOCK,
  EACH OrderLine OF Order NO-LOCK, Item OF OrderLine NO-LOCK
  BY Order.PromiseDate BY Customer.CustNum BY OrderLine.LineNum:
  DISPLAY Order.PromiseDate Customer.CustNum Order.OrderNum
    OrderLine.LineNum Item.ItemNum Item.ItemName.
END.

This procedure uses the LAST option to display information on the last Order of each Customer:

r-fore3.p

FOR EACH Customer NO-LOCK, LAST Order OF Customer:
  DISPLAY Customer.CustNum Customer.Name Order.OrderNum Order.OrderDate
    Order.Instructions.
  PAUSE 1 NO-MESSAGE.
  Order.Instructions = "Last order".
  DISPLAY Order.Instruction.
END.

Notes

See also

CATCH statement, FINALLY statement, FIND statement, Frame phrase, ON ENDKEY phrase, ON ERROR phrase, ON QUIT phrase, ON STOP phrase, Record phrase