Try OpenEdge Now
skip to main content
Configuration
Configuring AppServers and AppServer Internet Adapters : AppServer Internet Adapter configuration and administration : AppServer Internet Adapter (AIA) properties : AIA Controlling NameServer properties
 
AIA Controlling NameServer properties
Table 69. AIA Controlling NameServer properties
Property
Description
Connect using NameServer
A check box that indicates whether to connect to an AppServer using a Controlling NameServer.
Controlling NameServer
Identifies the NameServer that the AIA uses to find a broker that supports the correct application services.
Minimum NameServer client port and Maximum NameServer client port
Properties used to limit the range of ports of an AIA communicating with the NameServer via UPD. This is important when the AIA and NameServer are separated by a firewall.
The value for these two properties must be a number between 1024 and 65535 inclusive (or 0), and Minimum NameServer client port must be less than or equal to Maximum NameServer client port.
If the minimum and maximum values are both set to zero, then a random port number within the implicit fixed range will be dynamically assigned.
If both minimum and maximum values are set to the same port number, then this UDP port number will be used when communicating with the NameServer.
The default value for both minimum and maximum is 0.
AppServer host name
If you did not select the Connect using NameServer check box and the AIA will be directly connected to an AppServer or SonicMQ Adapter, you must specify the AppServer's or SonicMQ Adapter's host location.
AppServer port
If you did not select the Connect using NameServer check box and the AIA will be directly connected to an AppServer or SonicMQ Adapter, you must specify the AppServer's or SonicMQ Adapter's port.