README
     Progress (R) DataDirect (R)
	 
     Progress(R) DataDirect(R) for ODBC for Oracle(TM) Wire Protocol Driver

     Windows Platforms (32 and 64-bit)
     Release 8.0.2
     March 6, 2020


***********************************************************************
Copyright (C) 2020 Progress Software Corporation and/or its 
subsidiaries or affiliates. All Rights Reserved. 
***********************************************************************

This README file contains information for Progress(R) DataDirect(R)  
for ODBC for Oracle(TM) Wire Protocol Driver. 

This README file contains information not included in the PROGRESS
DATADIRECT(R) FOR ODBC FOR ORACLE WIRE PROTOCOL DRIVER USER'S GUIDE AND 
REFERENCE.


CONTENTS

Driver Requirements
Installation Directory
Changes Since 8.0.2 GA 
Changes for 8.0.2 GA
Changes for 8.0.1 GA 
Driver WorkAround Options
Notes, Known Problems, and Restrictions
Documentation
Installed Files for the 32-bit Driver
Installed Files for the 64-bit Driver


    Driver Requirements

IMPORTANT: You must have the Microsoft Data Access Components (MDAC) 
installed to use this product.
 
* For 32-bit Windows systems, version 2.6 or higher is required.
* For 64-bit Windows systems, version 2.8 or higher is required.

Depending on the version of your Windows operating system, these 
components may already be installed. You can download a utility that 
determines whether MDAC is installed and its version from the following 
Microsoft site:

http://msdn.microsoft.com/en-us/data/aa937730.aspx

You can also download MDAC from the same site.


    Installation Directory


* The default installation directory for the 32-bit driver on a 64-bit 
  system is:

  C:\Program Files (86)\Progress\DataDirect\ODBC_80

* The default installation directory for all other installations is:

  C:\Program Files\Progress\DataDirect\ODBC_80
  
  
    Changes Since 8.0.2 GA 

Certifications
--------------
* Certified with Oracle 19c R1 (19.1) 
  (driver version 08.02.2245 (B0498, U0347))
* Certified with Oracle Autonomous Transaction Processing Cloud 19c R1 (19.1*)
  (driver version 08.02.2245 (B0498, U0347))
* Certified with Oracle 18c R3 (18.3)
  (driver version 08.02.2158 (B0380, U0258))
* Certified with Oracle Database Cloud Service 18c R1 (18.1)
  (driver version 08.02.2114 (B0330, U0219))
* Certified with Oracle 18c R1 (18.1)
  (driver version 08.02.2114 (B0330, U0219))
* Certified with Oracle Autonomous Data Warehouse Cloud 12c R2 (12.2)
  (driver version 08.02.2099 (B0294, U0194)) 	

LDAP Support
------------
The driver has been enhanced to support using connection information stored in
an LDAP entry to establish a connection. You can configure the driver to use 
LDAP with the new LDAP Distinguished Name (LDAPDistinguishedName) option and 
refreshed Host (HostName) and Port Number (PortNumber) options. 

SSL Enhancement (1.0.2u)
------------------------
OpenSSL library 1.0.2r has been replaced with version 1.0.2u. In addition
to fixing multiple new vulnerabilities, version 1.0.2u also addresses the 
vulnerabilities resolved by version 1.0.2r. 

Version 1.0.2u of the OpenSSL library fixes the following security 
vulnerabilities:
* x64_64 Montgomery squaring procedure used in exponentiation with 
  512-bit moduli (CVE-2019-1563)
* Padding Oracle in PKCS7_dataDecode and CMS_decrypt_set1_pkey (CVE-2019-1563)
* Compute ECC cofactors if not provided during EC_GROUP construction 
  (CVE-2019-1547)
* Installation paths in diverse Windows builds (CVE-2019-1552)

Note: By default, the driver will attempt to load version 1.1.1 of the library;
      however, if the library cannot be loaded, the driver will fall back to 
      version 1.0.2.

curl Library Enhancement 
-------------------------
The curl library files that are installed with the product have been 
upgraded to version 7.67.0, which fixes a number of potential security
vulnerabilities. For more information on the vulnerabilities resolved
by this enhancement, refer to: https://curl.haxx.se/docs/vulnerabilities.html.

This upgrade is available starting in build 08.02.0116 of the curl library 
files.

Support for Oracle Connection Manager
-------------------------------------
The driver has been enhanced to support connecting through Oracle Connection
Manager using the TNSNAMES.ORA file. Refer to the user's guide for details. 

SSL Enhancement (1.1.1d) 
------------------------
The default version of the OpenSSL library, 1.0.2r, has reached the end of its
product life-cycle and has been upgraded to version 1.1.1d. In additon to
recieving full update support, version 1.1.1d fixes the following security
vulnerabilities:
 * Padding Oracle in PKCS7_dataDecode and CMS_decrypt_set1_pkey (CVE-2019-1563)
 * Windows builds with insecure path defaults (CVE-2019-1552)
 * Fork Protection (CVE-2019-1549)
 * ECDSA remote timing attack (CVE-2019-1547)
 * ChaCha20-Poly1305 with long nonces (CVE-2019-1543) 
 * Timing vulnerability in ECDSA signature generation (CVE-2018-0735) 
 
This upgrade is available in the 1.1.1 version of the OpenSSL library files, 
ivtls28.dll (32-bit) and ddtls28.dll (64-bit).   
 
Version 1.1.1d also addresses vulnerabilities resolved by earlier versions of 
the library.  

For more information on OpenSSL vulnerabilities resolved by this upgrade, refer
to the corresponding OpenSSL announcements at: 
https://www.openssl.org/news/vulnerabilities-1.1.1.html 
	
Note: By default, the driver will attempt to load version 1.1.1 of the library;
      however, if the library cannot be loaded, the driver will fall back to 
      version 1.0.2. 	

See "Designating an OpenSSL Library" in the "Notes, Known Issues, and 
Restrictions" section for build numbers and a comparison of libraries that are
installed with the driver.

AllowedOpenSSLVersions
----------------------
Determines which version of the OpenSSL library file the driver uses for data
encryption when multiple versions are installed with the product. For example, 
when specifying a value of 1.1.1 (AllowedOpenSSLVersions=1.1.1), the driver 
uses the 1.1.1 version of the library stored in the \drivers subdirectory. 
Refer to the user's guide for more information.

See "Designating an OpenSSL Library" in the "Notes, Known Issues, and 
Restrictions" section for build numbers and a comparison of these libraries.

Support for Windows Platforms
-----------------------------
The following Windows platforms have reached the end of their product lifecycle
and are no longer supported by the driver:
* Windows 8.0 (versions 8.1 and higher are still supported)
* Windows Vista (all versions)
* Windows XP (all versions)
* Windows Server 2003 (all versions)

Statement Attributes Enhancement
--------------------------------
The driver has been enhanced to support the following new statement attributes
that allow you to override connection option settings for an individual 
statement:
* SQL_ATTR_BULK_LOAD_ENABLED statement attribute overrides the EnableBulkLoad
  option
* SQL_ATTR_IANA_APP_CODE_PAGE statement attribute overrides the IANAAppCodePage
  option 

Refer to the User's Guide for more information.     
  
SSL Enhancement (1.0.2r) 
------------------------
Note: A newer version of the OpenSSL library, 1.1.1d, is now installed with the
product. In addition to fixing multiple new vulnerabilities, version 1.1.1d 
also addresses the vulnerabilities resolved by version 1.0.2r. 

The default OpenSSL library version has been updated to 1.0.2r, which fixes the 
following security vulnerabilities:
 * 0-byte record padding oracle (CVE-2019-1559)
 * Microarchitecture timing vulnerability in ECC scalar 
   multiplication (CVE-2018-5407)
 * Timing vulnerability in DSA signature generation (CVE-2018-0734)
 * Client DoS due to large DH parameter (CVE-2018-0732)
 * Cache timing vulnerability in RSA Key Generation (CVE-2018-0737)
 * Constructed ASN.1 types with a recursive definition could exceed the 
   stack (CVE-2018-0739)

This upgrade is available starting in build 08.02.0194 of the OpenSSL library 
file. 
  
HTTP Proxy Support
------------------	
The driver has been enhanced to support connecting to a proxy server through
an HTTP connection. HTTP proxy support is configurable with the new Proxy Host,
Proxy Mode, Proxy Password, Proxy Port, and Proxy User connection options.

Note: The HTTP proxy connections do not currently support SSL data encryption. 
  
Oracle Database Vault
---------------------
Support has been added for Oracle Database Vault.

Impersonation Support 
--------------------- 
The driver has been enhanced with the new Impersonate User connection option
that allows you to specify the proxy user ID used for impersonation. The user
ID specified using this option determines your permissions and identity when 
executing queries. 

Setting the Service Name/SID in the Server listener.ora File 
------------------------------------------------------------
The driver has been enhanced to support using the default Service Name or SID
specified in the server-side listener.ora file.

Setting Array Size with SQL_ATTR_ROW_ARRAY_SIZE 
-----------------------------------------------
The setting of the Array Size option can now be overridden by specifying the 
number of rows to fetch using the SQL_ATTR_ROW_ARRAY_SIZE statement attribute.	
	
Oracle Database Exadata Cloud Service
-------------------------------------
Support has been added for the Oracle Database Exadata Cloud Service.

SSL Enhancement (1.0.2n) for All SSL-Enabled Drivers
----------------------------------------------------
Note: OpenSSL library 1.0.2n has been replaced with version 1.0.2u. In addition
to fixing multiple new vulnerabilities, version 1.0.2u also addresses the 
vulnerabilities resolved by version 1.0.2n. 

Version 1.0.2n of the OpenSSL library fixes the following security 
vulnerabilities:
 * rsaz_1024_mul_avx2 overflow bug on x86_64(CVE-2017-3738)
 * Read/write after SSL object in error state (CVE-2017-3737)
 * bn_sqrx8x_internal carry bug on x86_64 (CVE-2017-3736)
 * Malformed X.509 IPAddressFamily could cause OOB read (CVE-2017-3735)	


    Changes for 8.0.2 GA 

Certifications
--------------
* Certified with Oracle 12c R2 (12.2) (driver version 08.01.2067 
  (B0252, U0168))	
* Certified with Windows Server 2016 (driver version 08.01.2047 (B0226, U0145))

Oracle Wallet 
-------------
Support for Oracle Wallet, including:
 * Oracle Wallet SSL Authentication
 * Using Oracle Wallet as a keystore or truststore for SSL data encryption.

Oracle Internet Directory
-------------------------
The driver has been enhanced to support using Oracle Internet Directory for 
LDAP Authentication. No additional driver configuration is required when 
authenticating with Oracle Internet Directory.
	
Oracle Advanced Security 
------------------------
The driver has been enhanced to support the following new data integrity 
algorithms for Oracle 12c and higher: SHA256, SHA384, SHA512. To use these 
algorithms, specify their values using the Data Integrity Types connection 
option and enable data integrity checks with the Data Integrity Level 
connection option.

As a result of this enhancement, the default value for the Data Integrity 
Types connection option has changed to the following: 
MD5,SHA1,SHA256,SHA384,SHA512   

Maximum Identifier Length
-------------------------
The maximum supported length of identifiers has been increased to 128 bytes 
when connecting to Oracle 12c R2 (12.2) databases. 
	
SSL Enhancement (1.0.2k) 
------------------------
Note: OpenSSL library 1.0.2k has been replaced with version 1.0.2u. In addition
to fixing multiple new vulnerabilities, version 1.0.2u also addresses the 
vulnerabilities resolved by version 1.0.2k. 

The default OpenSSL library version has been updated to 1.0.2k, which fixes the 
following security vulnerabilities:
 * Truncated packet could crash via OOB read (CVE-2017-3731)
 * BN_mod_exp may produce incorrect results on x86_64 (CVE-2017-3732)
 * Montgomery multiplication may produce incorrect results (CVE-2016-7055)
	

    Changes for 8.0.1 GA

Oracle 12 and 12a Authentication Protocols
------------------------------------------
The driver now supports the Oracle 12 and 12a authentication protocols, 
which provide improved security. 

Visual Studio 2015 Upgrade
--------------------------
The driver is now compiled using Visual Studio 2015 for improved security. 

SDU Size Connection Option
--------------------------
The new SDU Size connection option allows you to specify the size in bytes of
the Session Data Unit (SDU) that the driver requests when connecting to the 
server. 

Support Binary XML Connection Option
------------------------------------
The new Support Binary XML connection option enables the driver to support 
XMLType with binary storage on servers running Oracle 12c and higher. 

LOB Prefetch Size Connection Option
-----------------------------------
The new LOB Prefetch Size connection option allows you to specify the size of
prefetch data the driver returns for BLOBs and CLOBs for Oracle database 
versions 12.1.0.1 and higher. With LOB prefetch enabled, the driver can return 
LOB meta-data and the beginning of LOB data along with the LOB locator during 
a fetch operation. This can have significant performance impact, especially for
smaller LOBs that can potentially be entirely prefetched, because the data is 
available without having to go through the LOB protocol. 

Implicit Result Sets
--------------------
The driver now supports implicit result sets returned from stored procedures.

SSL Enhancement (1.0.2j) 
------------------------
Note: OpenSSL library 1.0.2j has been replaced with version 1.0.2u. In addition
to fixing multiple new vulnerabilities, version 1.0.2u also addresses the 
vulnerabilities resolved by version 1.0.2j. 

The default OpenSSL library version has been updated to 1.0.2j, which fixes the 
the following security vulnerabilities:
 * "Missing CRL sanity check" (CVE-2016-7052)
 * "OCSP Status Request extension unbounded memory growth" (CVE-2016-6304)
 * "SWEET32 Mitigation" (CVE-2016-2183)
 * "OOB write in MDC2_Update()" (CVE-2016-6303)
 * "Malformed SHA512 ticket DoS" (CVE-2016-6302)
 * "OOB write in BN_bn2dec()" (CVE-2016-2182)
 * "OOB read in TS_OBJ_print_bio()" (CVE-2016-2180)
 * "Pointer arithmetic undefined behaviour" (CVE-2016-2177)
 * "Constant time flag not preserved in DSA signing" (CVE-2016-2178)
 * "DTLS buffered message DoS" (CVE-2016-2179)
 * "DTLS replay protection DoS" (CVE-2016-2181)
 * "Certificate message OOB reads" (CVE-2016-6306)

Deprecated Enable N-CHAR Support Connection Option
--------------------------------------------------
The Enable N-CHAR Support connection option has been deprecated, and the driver 
behavior has been updated to always provide support for the N-types NCHAR, 
NVARCHAR2 and NCLOB. For compatibility purposes, the EnableNcharSupport 
attribute will continue to be supported for this release, but it will be 
deprecated in subsequent versions of the product.

Deprecated Enable Timestamp with Timezone Connection Option 
-----------------------------------------------------------
The Enable Timestamp with Timezone connection option has been deprecated, and 
the driver behavior has been updated to always expose timestamps with timezones
to the application. For compatibility purposes, the EnableTimestampwithTimezone
attribute will continue to be supported for this release, but it will be 
deprecated in subsequent versions of the product. 

Default Value for for the Data Integrity Level Connection Option
----------------------------------------------------------------
The default value for the Data Integrity Level connection option has been 
updated to 1 (Accepted). A data integrity check can now be made on data sent 
between the driver and the database server by default. 

Default Value for the Encryption Level Connection Option
--------------------------------------------------------
The default value for the Encryption Level connection option has been updated 
to 1 (Accepted). By default, encryption is now used on data sent between the 
driver and the database server if the database server requests or requires it.
 
 
      Driver WorkAround Options

Progress DataDirect has included non-standard connection options 
(workarounds) for the drivers that enable you to take full advantage of 
packaged ODBC-enabled applications requiring non-standard or extended 
behavior.

Refer to the chapter "WorkAround Options" in the PROGRESS DATADIRECT FOR ODBC
FOR ORACLE WIRE PROTOCOL DRIVER USER'S GUIDE AND REFERENCE for a description of
these options.
 
 
	Notes, Known Issues, and Restrictions 
     
Designating an OpenSSL Library
------------------------------
Although version 1.1.1d of the OpenSSL library is the most secure version of
the library, some characteristics of the library can cause connections to 
certain databases to fail. To allow you to continue using earlier versions 
until your environment is ready to migrate to version 1.1.1d, the product 
also installs earlier versions of the library.  

The following versions of the OpenSSL library have been installed with this
product, listed in order of most secure to least secure: 
* (Default) 1.1.1d (supported with file tls28.dll)
* 1.0.2u (file version 08.02.0244 of ssl28.dll) 

When determining which version of the OpenSSL library to use, consider the 
following factors: 

For version 1.1.1d:
Upgrading to 1.1.1d provides you with a fully supported version of the OpenSSL 
library that receives feature and security updates. Versions 1.0.2 and earlier 
have reached the end of their product lifecycle and will no longer receive 
updates after 12/31/2019.  

Upgrading to 1.1.1d fixes the following vulnerabilities in additon to 
vulnerabilities resolved by earlier versions of the library:
 * Padding Oracle in PKCS7_dataDecode and CMS_decrypt_set1_pkey (CVE-2019-1563)
 * Windows builds with insecure path defaults (CVE-2019-1552)
 * Fork Protection (CVE-2019-1549)
 * ECDSA remote timing attack (CVE-2019-1547)
 * ChaCha20-Poly1305 with long nonces (CVE-2019-1543) 
 * Timing vulnerability in ECDSA signature generation (CVE-2018-0735) 

Upgrading to version 1.1.1d includes the following risks: 
* The SSL v2 protocol is not supported. If your environment requires SSL v2, 
  the driver will be unable to connect using this library. 

Refer to "Designating an OpenSSL library" in the User's Guide and Reference for 
instructions on using an earlier version of the OpenSSL library. 

For more information on the OpenSSL vulnerabilities mentioned in this section, 
refer to the corresponding OpenSSL announcements at 
https://www.openssl.org/.

For Oracle 8 Server Users
-------------------------
The driver uses the XA protocol support in Oracle 8 to provide 
distributed transaction support. For recovery to work correctly, you 
must grant appropriate privileges on any server that will participate in 
a distributed transaction. You must grant the SELECT privilege on 
SYS.DBA_PENDING_TRANSACTIONS to all users that will use MTS. Refer to 
the Oracle 8 documentation for details on using Oracle XA.
  
126 Error When Modifying Data Sources on Windows 10
---------------------------------------------------
You may receive a 126 error when adding or configuring a data source stored
on a network location. This is caused by the settings of the User Account 
Control (UAC) security feature on Windows 10. To work around this issue:

Important: Implementing this fix disables security safeguards that are designed
to protect your machine. Before starting, refer to the following Microsoft 
documentation for potential risks associated with disabling the UAC feature:  
http://windows.microsoft.com/en-us/
windows/what-are-user-account-control-settings

1.  From the Start menu, type regedit in the search field; then, select regedit
    from the results list. The Registry Editor window opens. 

2.  Navigate to the following registry subkey: 

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System

3.  Right-click on the subkey; then, select New > DWORD Value. 

4.  Rename the new value EnableLinkedConnections. 

5.  Right-click EnableLinkedConnections, and then click Modify. The Edit DWORD 
    Value window opens. 

6.  In the Value data field, type 1. Click OK. 

7.  Close the Registry Editor; then, restart your computer. 

For SSL Users
-------------
When trying to connect to a database using SSL encryption, you may
receive an error message similar to: "PRNG not seeded". This is because
certain versions of some operating systems do not generate truly random
numbers necessary for encryption. For more information about this error
and available patches, please refer to the Web site:
http://www.openssl.org/support/faq.html#USER1
  
ODBC Development on Windows Platforms
--------------------------------------
Please read the notices.txt file in the installation directory for 
licensing information regarding the ODBC Core Components. Contact your 
Progress DataDirect representative if you have any questions.
  
SQLColAttribute(s)
------------------
The column attributes 1001 and 1002, which were assigned as DataDirect- 
specific attributes, were inadvertently used as system attributes by
the Microsoft 3.0 ODBC implementation. Applications using those 
attributes must now use 1901 and 1902, respectively.
 
SQL_C_NUMERIC
-------------
Because of inconsistencies in the ODBC specification, users attempting 
to use SQL_C_NUMERIC parameters must set the precision and scale values 
of the corresponding structure and the descriptor fields in the 
Application Parameter Descriptor.
 
For Developers Using IIS
------------------------
One of the most common connectivity issues encountered while using IIS 
(Microsoft's Internet Information Server) concerns the use and settings 
of the account permissions. If you encounter problems using DataDirect 
drivers with an IIS server, refer to KnowledgeBase document number 4274 
on the Progress DataDirect web site:

http://knowledgebase.datadirect.com.
 
For Microsoft Access Users
--------------------------
Some SQL implementations, such as PROGRESS, do not allow queries to 
contain the COUNT function without the DISTINCT set quantifier. For 
example, "SELECT COUNT(empid) FROM employees" is not a valid SQL query 
for PROGRESS. This type of query can be generated using Microsoft 
Access and results in an error. 
 
 
     Documentation	 	 

THE PROGRESS DATADIRECT FOR ODBC FOR ORACLE WIRE PROTOCOL DRIVER 
USER'S GUIDE AND REFERENCE
----------------------------------------------------------------
This guide is provided in PDF and HTML formats. 

The HTML version is installed in the OracleHelp subdirectory of your product
installation directory. You can access the help by opening the index.html file
or by clicking the Help button on the driver setup dialog.

The PDF version, which you can view using Adobe Reader, is available on the 
Progress DataDirect Web site or by clicking the PDF icon in the HTML version. 

NOTE: To download Adobe Reader, visit the Adobe Web site at 
http://www.adobe.com.


    Uninstalling the Driver 

You can uninstall the product or individual drivers through the Uninstall 
DataDirect for ODBC 8.0 option in the DataDirect program group.

		
    Installed Files for 32-bit Driver

This file list assumes a full installation of the driver and 
documentation.

The installer copies the following file to the Windows system 
directory:

ivtrc28.dll           DataDirect trace library

The installer copies the following files and subdirectories to the 
product installation directory, by default:

For the 32-bit driver on 64-bit machines:

  C:\Program Files (86)\Progress\DataDirect\ODBC_80

For all other installations:

  C:\Program Files\Progress\DataDirect\ODBC_80
  
fixes.txt                         List of fixes since last release
license.txt                       Progress DataDirect license agreement
 
\drivers:
ivcurl28.dll                      Library used for HTTP connections 
ivicu28.dll                       Unicode conversion tables
ivldap28.dll                      Library for LDAP connections  
ivora28.dll                       Oracle Wire Protocol driver 
ivora28r.dll                      Oracle Wire Protocol driver 
                                  resource file		
IVODBC.LIC                        DataDirect license file
ivssl28.dll                       TLS/SSL support file (OpenSSL library file, 
                                  version 1.0.2u)
ivtls28.dll                       TLS/SSL support file (OpenSSL library file, 
                                  version 1.1.1d)
ivtrc28.dll                       DataDirect trace library	
qesqlext.h                        Header file for DataDirect-specific ODBC 
                                  Definitions					

\drivers\OpenSSL:
\1.0.2u\ivssl28.dll               TLS/SSL support file 
                                  (OpenSSL library file, version 1.0.2u)
\latest\ivtls28.dll               TLS/SSL support file 
                                  (OpenSSL library file, version 1.1.1d)

\help\OracleHelp: 
index.html                        HTML help system entry file
\*.*                              Support folders for the HTML help system

\jre
*.*                               Files associated with the Oracle WP driver

\NOTICES:
ODBC for Oracle
8.0 NOTICES.TXT	                  Third-party vendor license agreements

\READMES:
ODBC FOR Oracle  
8.0 README.TXT	                  This file

\samples:
\bulk\bulk.c                      Bulk example source
\bulk\bulk.exe                    Bulk application
\bulk\bulk.mak                    Bulk example make file
\bulk\bulk.sln                    Bulk example solution file
\bulk\bulk.vcproj                 Bulk example project file
                       
\bulkstrm\bulk.cpp                Bulk streaming example source
\bulkstrm\bulk.hpp                Bulk streaming example header
\bulkstrm\bulk.rc                 Bulk streaming example resource file
\bulkstrm\bulkstreaming.sln       Bulk streaming example solution file
\bulkstrm\bulkstreaming.vcproj    Bulk streaming example project file
\bulkstrm\bulkstrm.exe            Bulk streaming example application
\bulkstrm\bulkstrm.txt            Bulk streaming description
\bulkstrm\msgprintf.hpp           Bulk streaming example header file
\bulkstrm\ProgressDataDirect.bmp
\bulkstrm\ProgressDataDirect.ico
\bulkstrm\winmain.cpp             Bulk streaming example source file

\example\example.c                Example source
\example\Example.exe              Example application
\example\example.h                Example header
\example\Example.mak              Example make file
\example\Example.sln              Example solution file
\example\Example.vcproj           Example project file
\example\example.txt              Example description

\TOOLS:
ddextwin.exe                      License Extender utility
ddprocinfo.exe                    Processor Information utility
DSNConverterSIL.exe               Data Source Converter utility
XMLP.exe                          A GUI demo tool that persists a result set to 
                                  an XML data file
								
\UNINSTALL\*.*			  Files used to uninstall the product		
		
		
    Installed Files for 64-bit Driver

This file list assumes a full installation of all drivers and 
documentation. 

The installer copies the following file to the Windows system 
directory:

ddtrc28.dll           DataDirect trace library

The installer copies the following files and subdirectories to the 
product installation directory, by default:

   C:\Program Files\Progress\DataDirect\ODBC_80\:	
		
fixes.txt                         List of fixes since last release
license.txt                       Progress DataDirect license agreement
 
\drivers:
ddcurl28.dll                      Library used for HTTP connections 
ddicu28.dll                       Unicode conversion tables
ddldap28.dll                      Library for LDAP connections  
ddora28.dll                       Oracle Wire Protocol driver 
ddora28r.dll                      Oracle Wire Protocol driver 
                                  resource file		
DDODBC.LIC                        DataDirect license file
ddssl28.dll                       TLS/SSL support file (OpenSSL library file,
                                  version 1.0.2u)
ddtls28.dll                       TLS/SSL support file (OpenSSL library file,
                                  version 1.1.1d)
qesqlext.h                        Header file for DataDirect-specific ODBC 
                                  Definitions
ddtrc28.dll                       DataDirect trace library

\drivers\OpenSSL:
1.0.2u\ddssl28.dll                TLS\SSL support file 
                                  (OpenSSL library file, version 1.0.2u)
latest\ddtls28.dll                TLS\SSL support file 
                                  (OpenSSL library file, version 1.1.1d)

\help\OracleHelp: 
index.html                        HTML help system entry file
\*.*                              Support folders for the HTML help system

\jre
*.*	                          Files associated with the Oracle WP driver

\NOTICES:
ODBC for Oracle
8.0 NOTICES.TXT	                  Third-party vendor license agreements

\READMES:
ODBC for Oracle  
8.0 README.TXT	                  This file

\samples:
\bulk\bulk.c                      Bulk example source
\bulk\bulk.exe                    Bulk application
\bulk\bulk.mak                    Bulk example make file
\bulk\bulk.sln                    Bulk example solution file
\bulk\bulk.vcproj                 Bulk example project file
                       
\bulkstrm\bulk.cpp                Bulk streaming example source
\bulkstrm\bulk.hpp                Bulk streaming example header
\bulkstrm\bulk.rc                 Bulk streaming example resource file
\bulkstrm\bulkstreaming.sln       Bulk streaming example solution file
\bulkstrm\bulkstreaming.vcproj    Bulk streaming example project file
\bulkstrm\bulkstrm.exe            Bulk streaming example application
\bulkstrm\bulkstrm.txt            Bulk streaming description

\bulkstrm\msgprintf.hpp           Bulk streaming example header file
\bulkstrm\ProgressDataDirect.bmp
\bulkstrm\ProgressDataDirect.ico
\bulkstrm\winmain.cpp             Bulk streaming example source file

\example\example.c                Example source
\example\Example.exe              Example application
\example\example.h                Example header
\example\Example.mak              Example make file
\example\Example.sln              Example solution file
\example\Example.vcproj           Example project file
\example\example.txt              Example description 

\TOOLS:
ddextwin.exe                      License Extender utility
ddprocinfo.exe                    Processor Information utility
DSNConverterSIL.exe               Data Source Converter utility
XMLP.exe                          A GUI demo tool that persists a result set to
                                  an XML data file
								
\UNINSTALL\*.*                    Files used to uninstall the product					  



 
~~~~~~~~~~~~~~~~
February 26, 2020
End of README.TXT