README
     Progress (R) DataDirect (R)
	 
     Progress(R) DataDirect(R) for ODBC for Oracle(TM) Wire Protocol Driver

     UNIX and Linux Platforms (32 and 64-bit)
     Release 8.0.2
     December 23, 2019


***********************************************************************
Copyright (C) 2019 Progress Software Corporation and/or its 
subsidiaries or affiliates. All Rights Reserved. 
***********************************************************************

This README file contains information for Progress(R) DataDirect(R)  
for ODBC for Oracle(TM) Wire Protocol Driver. 

This README file contains information not included in the PROGRESS
DATADIRECT(R) FOR ODBC FOR ORACLE WIRE PROTOCOL DRIVER USER'S GUIDE AND 
REFERENCE.


CONTENTS

Installation Directory
Changes Since 8.0.2 GA 
Changes for 8.0.2 GA 
Changes for 8.0.1 GA   
Configuring Data Sources
Driver WorkAround Options
Notes, Known Problems, and Restrictions
Documentation
Installed Files for the 32-bit Driver
Installed Files for the 64-bit Driver 



    Installation Directory


* The default installation directory for the 32-bit driver on a 64-bit 
  system is:

  C:\Program Files (86)\Progress\DataDirect\ODBC_80

* The default installation directory for all other installations is:

  C:\Program Files\Progress\DataDirect\ODBC_80
  
  
    Changes Since 8.0.2 GA

Certifications
--------------
* Certified with Red Hat Enterprise 8.0 
  (driver version 08.02.2272 (B0547, U0390))
* Certified with Oracle 19c R1 (19.1) 
  (driver version 08.02.2245 (B0498, U0347))
* Certified with Oracle Autonomous Transaction Processing Cloud 19c R1 (19.1*)
  (driver version 08.02.2245 (B0498, U0347))
* Certified with Oracle 18c R3 (18.3)
  (driver version 08.02.2158 (B0380, U0258))
* Certified with Oracle Database Cloud Service 18c R1 (18.1)
  (driver version 08.02.2114 (B0330, U0219))
* Certified with Oracle 18c R1 (18.1)
  (driver version 08.02.2114 (B0330, U0219))
* Certified with Oracle Autonomous Data Warehouse Cloud 12c R2 (12.2)
  (driver version 08.02.2099 (B0294, U0194)) 

curl Library Enhancement 
------------------------
The curl library files that are installed with the product have been 
upgraded to version 7.67.0, which fixes a number of potential security
vulnerabilities. For more information on the vulnerabilities resolved
by this enhancement, refer to: https://curl.haxx.se/docs/vulnerabilities.html.

This upgrade is available starting in build 08.02.0116 of the curl library 
files.

Support for Oracle Connection Manager
-------------------------------------
The driver has been enhanced to support connecting through Oracle Connection
Manager using the TNSNAMES.ORA file. Refer to the user's guide for details. 

SSL Enhancement (1.1.1d) 
------------------------
The default version of the OpenSSL library, 1.0.2r, has reached the end of its
product life-cycle and has been upgraded to version 1.1.1d. In additon to
recieving full update support, version 1.1.1d fixes the following security
vulnerabilities:
 * Padding Oracle in PKCS7_dataDecode and CMS_decrypt_set1_pkey (CVE-2019-1563)
 * Windows builds with insecure path defaults (CVE-2019-1552)
 * Fork Protection (CVE-2019-1549)
 * ECDSA remote timing attack (CVE-2019-1547)
 * ChaCha20-Poly1305 with long nonces (CVE-2019-1543) 
 * Timing vulnerability in ECDSA signature generation (CVE-2018-0735) 
 
This upgrade is available in the 1.1.1 version of the OpenSSL library files, 
libivtls28.so [.a|.sl] (32-bit) and libddtls28.so [.a] (64-bit).   
 
Version 1.1.1d also addresses vulnerabilities resolved by earlier versions of 
the library.  

For more information on OpenSSL vulnerabilities resolved by this upgrade, refer
to the corresponding OpenSSL announcements at: 
https://www.openssl.org/news/vulnerabilities-1.1.1.html 
	
Note: By default, the driver will attempt to load version 1.1.1 of the library;
      however, if the library cannot be loaded, the driver will fall back to 
      version 1.0.2.

See "Designating an OpenSSL Library" in the "Notes, Known Issues, and 
Restrictions" section for build numbers and a comparison of libraries that are
installed with the driver.	

AllowedOpenSSLVersions
----------------------
Determines which version of the OpenSSL library file the driver uses for data
encryption when multiple versions are installed with the product. For example, 
when specifying a value of 1.1.1 (AllowedOpenSSLVersions=1.1.1), the driver 
uses the 1.1.1 version of the library stored in the /lib subdirectory. Refer to
the user's guide for more information.

See "Designating an OpenSSL Library" in the "Notes, Known Issues, and 
Restrictions" section for build numbers and a comparison of these libraries.

Statement Attributes Enhancement
--------------------------------
The driver has been enhanced to support the following new statement attributes
that allow you to override connection option settings for an individual 
statement:
* SQL_ATTR_BULK_LOAD_ENABLED statement attribute overrides the EnableBulkLoad
  option
* SQL_ATTR_IANA_APP_CODE_PAGE statement attribute overrides the IANAAppCodePage
  option 

Refer to the User's Guide for more information.   
  
SSL Enhancement (1.0.2r) 
------------------------
Note: A newer version of the OpenSSL library, 1.1.1d, is now installed with the
product. In addition to fixing multiple new vulnerabilities, version 1.1.1d 
also addresses the vulnerabilities resolved by version 1.0.2r. 

The default OpenSSL library version has been updated to 1.0.2r, which fixes the 
following security vulnerabilities:
 * 0-byte record padding oracle (CVE-2019-1559)
 * Microarchitecture timing vulnerability in ECC scalar 
   multiplication (CVE-2018-5407)
 * Timing vulnerability in DSA signature generation (CVE-2018-0734)
 * Client DoS due to large DH parameter (CVE-2018-0732)
 * Cache timing vulnerability in RSA Key Generation (CVE-2018-0737)
 * Constructed ASN.1 types with a recursive definition could exceed the 
   stack (CVE-2018-0739)

This upgrade is available starting in build 08.02.0194 of the OpenSSL library 
file.	  
  
HTTP Proxy Support
------------------	
The driver has been enhanced to support connecting to a proxy server through
an HTTP connection. HTTP proxy support is configurable with the new ProxyHost,
ProxyMode, ProxyPassword, ProxyPort, and ProxyUser connection options. 

Note: The HTTP proxy connections do not currently support SSL data encryption. 
  
Oracle Database Vault
---------------------
Support has been added for Oracle Database Vault.

Impersonation Support 
--------------------- 
The driver has been enhanced with the new Impersonate User connection option
that allows you to specify the proxy user ID used for impersonation. The user
ID specified using this option determines your permissions and identity when 
executing queries. 

Setting the Service Name/SID in the Server listener.ora File 
------------------------------------------------------------
The driver has been enhanced to support using the default Service Name or SID
specified in the server-side listener.ora file.

Setting Array Size with SQL_ATTR_ROW_ARRAY_SIZE 
-----------------------------------------------
The setting of the Array Size option can now be overridden by specifying the 
number of rows to fetch using the SQL_ATTR_ROW_ARRAY_SIZE statement attribute.  
  
Oracle Database Exadata Cloud Service
-------------------------------------
Support has been added for the Oracle Database Exadata Cloud Service.

SSL Enhancement (1.0.2n) for All SSL-Enabled Drivers
----------------------------------------------------
Note: OpenSSL library 1.0.2n has been replaced with version 1.0.2r. In addition
to fixing multiple new vulnerabilities, version 1.0.2r also addresses the 
vulnerabilities resolved by version 1.0.2n. 

Version 1.0.2n of the OpenSSL library fixes the following security 
vulnerabilities:
 * rsaz_1024_mul_avx2 overflow bug on x86_64(CVE-2017-3738)
 * Read/write after SSL object in error state (CVE-2017-3737)
 * bn_sqrx8x_internal carry bug on x86_64 (CVE-2017-3736)
 * Malformed X.509 IPAddressFamily could cause OOB read (CVE-2017-3735)	
  
  
    Changes for 8.0.2 GA 
	
Certifications
--------------
* Certified with Red Hat Enterprise 7.3 (driver version 
  08.01.2073 (B0259, U0174))
* Certified with Oracle 12c R2 (12.2) (driver version 08.01.2067 
  (B0252, U0168))	
  
Enhanced Platform Support
-------------------------
Support for the following platforms is now generally available: 
 * HP-UX IPF (32 and 64-bit)
 * HP-UX PA-RISC (32-bit) 
 * Oracle Solaris x86 (32- and 64-bit)
 * Oracle Solaris on SPARC (32- and 64-bit)
  
Linux Itanium II Support 
------------------------  
Support for the Intel Itanium II (IPF) processor on the following 64-bit Linux
platforms is now generally available:  
 * CentOS Linux 4.x, 5.x, 6.x, and 7.x
 * Oracle Linux 4.x, 5.x, 6.x, and 7.x
 * Red Hat Enterprise Linux 4.x, 5.x, 6.x, and 7.x 
  
Oracle Wallet 
-------------
Support for Oracle Wallet, including:
 * Oracle Wallet SSL Authentication
 * Using Oracle Wallet as a keystore or truststore for SSL data encryption.
  
Oracle Internet Directory
-------------------------
The driver has been enhanced to support using Oracle Internet Directory for 
LDAP Authentication. No additional driver configuration is required when 
authenticating with Oracle Internet Directory.
  
Oracle Advanced Security 
------------------------
The driver has been enhanced to support the following new data integrity 
algorithms for Oracle 12c and higher: SHA256, SHA384, SHA512. To use these 
algorithms, specify their values using the DataIntegrityTypes connection 
option and enable data integrity checks with the DataIntegrityLevel 
connection option.  
  
As a result of this enhancement, the default value for the DataIntegrityTypes
connection option has changed to the following: 
MD5,SHA1,SHA256,SHA384,SHA512  
  
Maximum Identifier Length
-------------------------
The maximum supported length of identifiers has been increased to 128 bytes 
when connecting to Oracle 12c R2 (12.2) databases.
	
SSL Enhancement (1.0.2k) 
------------------------
Note: OpenSSL library 1.0.2k has been replaced with version 1.0.2r. In addition
to fixing multiple new vulnerabilities, version 1.0.2r also addresses the 
vulnerabilities resolved by version 1.0.2k. 

The default OpenSSL library version has been updated to 1.0.2k, which fixes the 
following security vulnerabilities:
 * Truncated packet could crash via OOB read (CVE-2017-3731)
 * BN_mod_exp may produce incorrect results on x86_64 (CVE-2017-3732)
 * Montgomery multiplication may produce incorrect results (CVE-2016-7055)
  
  
    Changes for 8.0.1 GA

New Operating System Support
----------------------------
* Certified with Debian 7.11, 8.5
* Certified with Ubuntu 14.04, 16.04
   
Oracle 12 and 12a Authentication Protocols
------------------------------------------
The driver now supports the Oracle 12 and 12a authentication protocols, 
which provide improved security. 

SDUSize Connection Option
-------------------------
The new SDUSize connection option allows you to specify the size in bytes of
the Session Data Unit (SDU) that the driver requests when connecting to the 
server. 

SupportBinaryXML Connection Option
----------------------------------
The new SupportBinaryXML connection option enables the driver to support 
XMLType with binary storage on servers running Oracle 12c and higher. 

LOBPrefetchSize Connection Option
---------------------------------
The new LOBPrefetchSize connection option allows you to specify the size of
prefetch data the driver returns for BLOBs and CLOBs for Oracle database 
versions 12.1.0.1 and higher. With LOB prefetch enabled, the driver can return 
LOB meta-data and the beginning of LOB data along with the LOB locator during 
a fetch operation. This can have significant performance impact, especially for
smaller LOBs that can potentially be entirely prefetched, because the data is 
available without having to go through the LOB protocol. 

Implicit Result Sets
--------------------
The driver now supports implicit result sets returned from stored procedures.

SSL Enhancement (1.0.2j) 
------------------------
Note: OpenSSL library 1.0.2j has been replaced with version 1.0.2r. In addition
to fixing multiple new vulnerabilities, version 1.0.2r also addresses the 
vulnerabilities resolved by version 1.0.2j. 
 * "Missing CRL sanity check" (CVE-2016-7052)
 * "OCSP Status Request extension unbounded memory growth" (CVE-2016-6304)
 * "SWEET32 Mitigation" (CVE-2016-2183)
 * "OOB write in MDC2_Update()" (CVE-2016-6303)
 * "Malformed SHA512 ticket DoS" (CVE-2016-6302)
 * "OOB write in BN_bn2dec()" (CVE-2016-2182)
 * "OOB read in TS_OBJ_print_bio()" (CVE-2016-2180)
 * "Pointer arithmetic undefined behaviour" (CVE-2016-2177)
 * "Constant time flag not preserved in DSA signing" (CVE-2016-2178)
 * "DTLS buffered message DoS" (CVE-2016-2179)
 * "DTLS replay protection DoS" (CVE-2016-2181)
 * "Certificate message OOB reads" (CVE-2016-6306)

Deprecated EnableNcharSupport Connection Option
-----------------------------------------------
The EnableNcharSupport connection option has been deprecated, and the driver 
behavior has been updated to always provide support for the N-types NCHAR, 
NVARCHAR2 and NCLOB. For compatibility purposes, the EnableNcharSupport 
attribute can still be manually specified for this release, but it will be 
deprecated in subsequent versions of the product.

Deprecated EnableTimestampwithTimezone Connection Option 
--------------------------------------------------------
The EnableTimestampwithTimezone connection option has been deprecated, and 
the driver behavior has been updated to always expose timestamps with timezones 
to the application. For compatibility purposes, the EnableTimestampwithTimezone
attribute can still be specified for this release, but it will be 
deprecated in subsequent versions of the product. 

Default Value for for the DataIntegrityLevel Connection Option
--------------------------------------------------------------
The default value for the DataIntegrityLevel connection option has been 
updated to 1 (Accepted). A data integrity check can now be made on data sent 
between the driver and the database server by default. 

Default Value for the EncryptionLevel  Connection Option
--------------------------------------------------------
The default value for the EncryptionLevel connection option has been updated 
to 1 (Accepted). By default, encryption is now used on data sent between the 
driver and the database server if the database server requests or requires it.
 
 
      Configuring Data Sources

Data sources are stored in the system information file (typically, 
odbc.ini). For details on configuring this file, see the PROGRESS DATADIRECT
FOR ODBC FOR ORACLE WIRE PROTOCOL DRIVER USER'S GUIDE AND REFERENCE.
 
 
     Driver WorkAround Options

Progress DataDirect has included non-standard connection options 
(workarounds) for the drivers that enable you to take full advantage of 
packaged ODBC-enabled applications requiring non-standard or extended 
behavior.

Refer to the chapter "WorkAround Options" in the User's Guide and Reference
for a description of these options.
 
 
	Notes, Known Issues, and Restrictions   

Designating an OpenSSL Library
------------------------------
Although version 1.1.1d of the OpenSSL library is the most secure version of
the library, some characteristics of the library can cause connections to 
certain databases to fail. To allow you to continue using earlier versions 
until your environment is ready to migrate to version 1.1.1d, the product 
also installs earlier versions of the library. 

The following versions of the OpenSSL library have been installed with this
product, listed in order of most secure to least secure: 
* (Default) 1.1.1d (supported with file lib<xx>tls28.so [.a|.sl])
* 1.0.2r (file version 08.02.0194 of lib<xx>ssl28.so [.a|.sl])

When determining which version of the OpenSSL library to use, consider the 
following factors: 

For version 1.1.1d:
Upgrading to 1.1.1d provides you with a fully supported version of the OpenSSL 
library that receives feature and security updates. Versions 1.0.2 and earlier 
have reached the end of their product lifecycle and will no longer receive 
updates after 12/31/2019.  

Upgrading to 1.1.1d fixes the following vulnerabilities in additon to 
vulnerabilities resolved by earlier versions of the library:
 * Padding Oracle in PKCS7_dataDecode and CMS_decrypt_set1_pkey (CVE-2019-1563)
 * Windows builds with insecure path defaults (CVE-2019-1552)
 * Fork Protection (CVE-2019-1549)
 * ECDSA remote timing attack (CVE-2019-1547)
 * ChaCha20-Poly1305 with long nonces (CVE-2019-1543) 
 * Timing vulnerability in ECDSA signature generation (CVE-2018-0735) 

Upgrading to version 1.1.1d includes the following risks: 
* The SSL v2 protocol is not supported. If your environment uses SSL v2, the 
  driver will be unable to connect using this library. 

Refer to "Designating an OpenSSL library" in the User's Guide and Reference for 
instructions on using an earlier version of the OpenSSL library.  

For more information on the OpenSSL vulnerabilities mentioned in this section, 
refer to the corresponding OpenSSL announcements at 
https://www.openssl.org/.

For Oracle 8 Server Users
-------------------------
The driver uses the XA protocol support in Oracle 8 to provide 
distributed transaction support. For recovery to work correctly, you 
must grant appropriate privileges on any server that will participate in 
a distributed transaction. You must grant the SELECT privilege on 
SYS.DBA_PENDING_TRANSACTIONS to all users that will use MTS. Refer to 
the Oracle 8 documentation for details on using Oracle XA.

For SSL Users
-------------
When trying to connect to a database using SSL encryption, you may
receive an error message similar to: "PRNG not seeded". This is because
certain versions of some operating systems do not generate truly random
numbers necessary for encryption. For more information about this error
and available patches, please refer to the Web site:
http://www.openssl.org/support/faq.html#USER1
  
ODBC Development on UNIX and Linux Platforms
--------------------------------------------
All of the Release 8.0 Core Components (header files, etc.) needed for 
development of ODBC applications on UNIX and Linux are installed into 
the /include directory created by the product installer.

Please read the notices.txt file in the installation directory for 
licensing information regarding the ODBC Core Components. Contact your 
Progress DataDirect representative if you have any questions.

Developers using programming languages other than C++:
The DataDirect ODBC Driver Manager is a C++ shared library. The ODBC 
Driver Manager can be used with any language that supports loading a 
C++ shared library; however, if you are using a programming language 
other than C++, you must take additional steps to ensure that the C++ 
libraries are initialized properly when loaded. If you are not using 
C++, consult your compiler documentation for instructions on using C++ 
shared libraries with your application.

LANG Environment Setting on UNIX and Linux Platforms
----------------------------------------------------
A default installation of the product on UNIX and Linux assumes that 
the value of the LANG environment setting is en_US. If your locale is 
not set to en_US, the drivers may not return error messages properly. 
In this case, you must create a symbolic link in the 
<Install_Dir>/locale directory that has the same value as the LANG 
environment setting. This link must point to the 
<Install_Dir>/locale/en_US directory.

SQLColAttribute(s)
------------------
The column attributes 1001 and 1002, which were assigned as DataDirect- 
specific attributes, were inadvertently used as system attributes by
the Microsoft 3.0 ODBC implementation. Applications using those 
attributes must now use 1901 and 1902, respectively.
 
SQL_C_NUMERIC
-------------
Because of inconsistencies in the ODBC specification, users attempting 
to use SQL_C_NUMERIC parameters must set the precision and scale values 
of the corresponding structure and the descriptor fields in the 
Application Parameter Descriptor.
 
For Developers Using IIS
------------------------
One of the most common connectivity issues encountered while using IIS 
(Microsoft's Internet Information Server) concerns the use and settings 
of the account permissions. If you encounter problems using DataDirect 
drivers with an IIS server, refer to KnowledgeBase document number 4274 
on the Progress DataDirect web site:

http://knowledgebase.datadirect.com.
 
For AIX Users
-------------
Some IBM AIX C compilers, such as xlc 3.1.4, do not support the use 
of C++ build binaries. C developers on AIX should consult their 
compiler documentation and verify that their AIX C compiler supports 
the use of C++ shared libraries or the application could be unstable.

Unexpected behavior may occur randomly if the LIBPATH variable 
exceeds 178 characters AND the ORACLE_HOME variable is relatively 
long. To resolve this, create a shorter symbolic link for 
ORACLE_HOME.

For Oracle Users
----------------
If you are using Oracle 8.1.7, you must have the 8.1.7.1 server patch
installed. Otherwise, you may receive the Oracle error:"ORA-03120: 
two-task conversion routine: integer overflow" when fetching LOB data.

SQLProcedures and SQLProcedureColumns now include functions/procedures 
from Oracle packages. They are denoted in the result set as 
PackageName.ProcedureName for the PROCEDURE_NAME.

To use static scrollable cursors with result sets containing long 
columns, you must set EnableStaticCursorsForLongData (ESCLD) to 1 
(EnableStaticCursorsForLongData=1) in the data source entry of the 
Registry or in a connection string. The default setting is 0.

You must have a complete installation of the Oracle 8i client software 
for the Oracle (client) driver to operate properly when accessing 
remote Oracle 8i servers 8.0.5 or higher. Be sure that you have 
installed Oracle 8i Client 8.1.7, installation type:  Programmer.

NOTES: On Linux, you must use the Oracle Net8 Client version 8.1.6.1.

For HP-UX 11 aCC Users Only
---------------------------
The driver for HP-UX 11 aCC is supported on HP-UX 11.0
when running with HP-UX applications built using the HP aCC
compiler version 3.05 or higher.
The ODBC drivers require certain runtime library patches. HP-UX
patches are publicly available from the HP Web site (www.hp.com). The
required patch is:
PHSS_14577
HP updates the patch database regularly; therefore, the patch
numbers in this file may be superseded by newer versions. If you
search for any of the specified patches on an HP site and receive
a message that a patch has been superseded, download and install
the replacement patch.
Progress DataDirect provides a shared library creation script named
genclntsh816, described in the Oracle chapter of the DATADIRECT CONNECT
SERIES FOR ODBC USER'S GUIDE. This script is relevant for HP-UX 11
PA-RISC only, not for IPF.

 
     Documentation	 	 

THE PROGRESS DATADIRECT FOR ODBC FOR ORACLE WIRE PROTOCOL DRIVER
USER'S GUIDE AND REFERENCE
----------------------------------------------------------------
The User's Guide and Reference is provided in PDF and HTML versions. Both 
versions are installed in the OracleHelp subdirectory of your product 
installation directory. You can access the HTML help by opening the index.html
file. The PDF version, which you can view using Adobe Reader, can be viewed by 
opening the cassandraodbcuser.pdf file.


    Uninstalling the Driver 

You can uninstall the product or individual drivers by opening the 
uninstall_ODBC_80_<xx>bit file in the uninstall directory.


   Installed Files the 32-bit Driver

This file list assumes a full installation of the driver and 
documentation.

The installer copies the following files and subdirectories to the 
product installation directory, by default:

/opt/Progress/DataDirect/ODBC_80_32bit:


odbc.csh                         Setup script for C shell
odbc.ini                         Sample odbc.ini file
odbcinst.ini                     Sample odbcinst.ini file
odbc.sh                          Setup script for Bourne shell
IVODBC.LIC                       DataDirect license file
fixes.txt                        List of fixes since last release
license.txt                      Progress DataDirect license agreement

/bin:
ivtestlib                        Test application to check that required 
                                 libraries are present and loadable
								 
/help: 
oraclewp_connect.txt             Help text for the Oracle WP driver 
                                 SQLDriverConnect dialog 
/help/OracleHelp:
index.html                       HTML help system entry file
*.*                              Support folders for the HTML help system

/include:
odbcinst.h                       Include files
qesqlext.h
sql.h
sqlext.h
sqltypes.h
sqlucode.h
sqlunx.h

/lib:

The following library files all have the extension .so, except when
installed on HP-UX PA-RISC, in which case the extension is .sl.

ivora28.so                       Oracle WP driver  
ivtrc28.so                       Progress DataDirect trace library
libivcurl28.so                   Library used for HTTP connections [.a on AIX]
libivicu28.so                    Unicode conversion tables  [.a on AIX]
libivmbackw.so                   SQLDriverConnect Motif library [.a on AIX]
libivssl28.so                    TLS/SSL support file (OpenSSL library 
                                 version 1.0.2r) [.a on AIX]
libivtls28.so                    TLS/SSL support file (OpenSSL library 
                                 version 1.1.1d) [.a on AIX]
libodbc.so                       ODBC Driver Manager [.a on AIX]
libodbcinst.so                   ODBC Installer [.a on AIX]
odbc.so                          ODBC Driver Manager (dynamically loadable) 
                                 [AIX only]
odbccurs.so                      ODBC Cursor library 
odbcinst.so                      ODBC Installer (dynamically loadable) 
                                 [AIX only]
vscnctdlg.so                     ODBC library for Motif operations

/lib/OpenSSL:
/latest/libivssl28.so            TLS/SSL support file (OpenSSL library 
                                 version 1.1.1d) [.a on AIX] 
/1.0.2r/libivssl28.so            TLS/SSL support file (OpenSSL library 
                                 version 1.0.2r) [.a on AIX] 

/locale/en_US/LC_MESSAGES:
ivmbackw.mo                      Motif library message file
ivmbackw.po                      Motif library message source
ivora28.mo                       Oracle WP driver message file
ivora28.po                       Oracle WP driver message file source
odbc.mo                          ODBC Driver Manager message file
odbc.po                          ODBC Driver Manager message source


/NOTICES:
ODBC for Oracle 
v8.0 notices.txt                 Third-party vendor license agreements	


/READMES:
ODBC for Oracle 
v8.0 readme.txt	                 This file

/samples:
/bulk/bulk                       Bulk application
/bulk/bulk.c                     Bulk example source
/bulk/bulk.mak                   Bulk example make file
/bulk/bulk.txt                   Bulk example description

/bulkstrm/bulk.cpp               Bulk streaming example source
/bulkstrm/bulk.hpp               Bulk streaming example header
/bulkstrm/bulkstrm               Bulk streaming example application
/bulkstrm/bulkstrm.txt           Bulk streaming example description
/bulkstrm/main.cpp               Bulk streaming example source
/bulkstrm/msgprintf.hpp          Bulk streaming example header
/bulkstrm/streambulk.mak         Bulk streaming example make file

/example/example                 Example application
/example/example.c               Example source
/example/example.h               Example header
/example/example.mak             Example make file
/example/example.txt             Example description

/tools:
ddextu                           License Extender utility
ddprocinfo                       Processor Information utility


	Installed Files for the 64-bit Driver

This file list assumes a full installation of all drivers and 
documentation. 

The installer copies the following files and subdirectories to the 
product installation directory, by default:

/opt/Progress/DataDirect/ODBC_80_64bit:

odbc.csh                         Setup script for C shell
odbc.ini                         Sample odbc.ini file
odbcinst.ini                     Sample odbcinst.ini file
odbc.sh                          Setup script for Bourne shell
DDODBC.LIC                       DataDirect license file
fixes.txt                        List of fixes since last release
license.txt                      Progress DataDirect license agreement

/bin:
ddtestlib                        Test application to check that required 
                                 libraries are present and loadable

/help: 
oraclewp_connect.txt             Help text for the Oracle WP driver 
                                 SQLDriverConnect dialog 
/help/OracleHelp:
index.html                       HTML help system entry file
*.*                              Support folders for the HTML help system

/include:
odbcinst.h                       Include files
qesqlext.h
sql.h
sqlext.h
sqltypes.h
sqlucode.h
sqlunx.h

/lib:
ddora28.so                       Oracle WP driver  
ddtrc28.so                       Progress DataDirect trace library
libddcurl28.so                   Library used for HTTP connections [.a on AIX]
libddicu28.so                    Unicode conversion tables  [.a on AIX]
libddmbackw.so                   SQLDriverConnect Motif library [.a on AIX]
libddssl28.so                    TLS/SSL support file(OpenSSL library 
                                 version 1.0.2r) [.a on AIX]
libddtls28.so                    TLS/SSL support file(OpenSSL library 
                                 version 1.1.1d) [.a on AIX]
libodbc.so                       ODBC Driver Manager [.a on AIX]
libodbcinst.so                   ODBC Installer [.a on AIX]
odbc.so                          ODBC Driver Manager (dynamically loadable) 
                                 [AIX only]
odbccurs.so                      ODBC Cursor library 
odbcinst.so                      ODBC Installer (dynamically loadable) 
                                 [AIX only]
vscnctdlg.so                     ODBC library for Motif operations

/lib/OpenSSL:
latest/libddssl28.so             TLS/SSL support file (OpenSSL library 
                                 version 1.1.1d) [.a on AIX] 
1.0.2r/libddssl28.so             TLS/SSL support file (OpenSSL library 
                                 version 1.0.2r) [.a on AIX] 

/locale/en_US/LC_MESSAGES:
ddmbackw.mo                      Motif library message file
ddmbackw.po                      Motif library message source
ddora28.mo                       Oracle WP driver message file
ddora28.po                       Oracle WP driver message file source
odbc.mo                          ODBC Driver Manager message file
odbc.po                          ODBC Driver Manager message source

/notices:
ODBC for Oracle
v8.0 notices.txt	             Third-party vendor license agreements	

/readmes:
ODBC for Oracle
v8.0 readme.txt	             This file

/samples:
/bulk/bulk                       Bulk application
/bulk/bulk.c                     Bulk example source
/bulk/bulk.mak                   Bulk example make file
/bulk/bulk.txt                   Bulk example description

/bulkstrm/bulk.cpp               Bulk streaming example source
/bulkstrm/bulk.hpp               Bulk streaming example header
/bulkstrm/bulkstrm               Bulk streaming example application
/bulkstrm/bulkstrm.txt           Bulk streaming example description
/bulkstrm/main.cpp               Bulk streaming example source
/bulkstrm/msgprintf.hpp          Bulk streaming example header
/bulkstrm/streambulk.mak         Bulk streaming example make file

/example/example                 Example application
/example/example.c               Example source
/example/example.h               Example header
/example/example.mak             Example make file
/example/example64.txt           Example description

/tools:
ddextu                           License Extender utility
ddprocinfo                       Processor Information utility			  
  
  

~~~~~~~~~~~~~~~~~
December 23, 2019
End of README.TXT